GE JAS02 Manual Del Propietario E Instrucciones De Instalación página 10

Using the oven controls.
Oven Control, Clock, and Timer and Features and Settings
10
Bake Pad
Touch to select the bake function.
Bake Light
Flashes while in edit mode - you can change the
oven temperature at this point. Glows when the
oven is in bake mode
Broil Hi/Lo Pad
Touch to select the broil function.
Broil Light
Flashes while in edit mode - you can switch from
Hi to Lo Broil at this point. Glows when the oven is
in broil mode.
Display
Shows the operations you have selected, the
time of day and the cooking status.
Cooking Time Pad
Touch this pad and then touch the + or - pad to
set the amount of time you want your food to
cook. The oven will shut off when the cooking
time has run out.
Delay Start Pad
Use along with Cooking Time or Self Clean pads
to set the oven to start and stop automatically at
a time you set.
Oven Light On/Off Pad
Touch to turn the oven light on or off.
Time/Clock Pad
Touch this pad to select the time feature. Then
press + and - pads to adjust the time.
To set the clock, touch this pad twice and hold
3 seconds and then touch the + and - pads. The
time of day will flash in the display when the
oven is first turned on.
Start Pad
Must be touched to start any cooking.
- Pad
Short taps to this pad will decrease the time or
temperature by small amounts. Touch and hold
the pad to decrease the time or temperature by
larger amounts.
+ Pad
Short taps to this pad will increase the time or
temperature by small amounts. Touch and hold
the pad to increase the time or temperature by
larger amounts.
Clear/Off Pad
Touch to cancel ALL oven operations except
the clock and timer.
Self Clean Pad
Touch to select self-cleaning function. See the
Using the self-cleaning oven section.
Clean Light
Flashes while in edit mode - you can change
the length of time for the self-clean cycle at this
point. Glows when the oven is in the self-clean
cycle. After the self-clean cycle, the light will turn
off. Unlatch the door.
If "F– and a number or letter" flash in the display and the
oven control signals, this indicates a function error code.
Touch the Clear/Off pad. Allow the oven to cool for one
hour. Put the oven back into operation. If the function
error code repeats, disconnect the power to the oven
and call for service.