Sleep Timer - Aiwa LCX-357 Manual De Instrucciones

NOTE
• Timer playback and timer recording will not begin unless the
power is turned off.
• If you use the unit while the timer is set, repeat steps 6 to 8 to
prepare the source (and the recording destination), and adjust
the volume and tone before turning off the power.
To check the timer setting
Press TIMER/SLEEP repeatedly so that "TM PLAY" or "TM REC"
flashes. After 4 seconds, the timer-on time, the source and the
duration for the timer-activated period are displayed for 4 seconds.
To change the timer setting
Set the timer again from the beginning.
To cancel timer standby mode temporarily
Press TIMER/SLEEP repeatedly so that "TM OFF" is displayed.
5 (and 4) disappear on the display.

SLEEP TIMER

1
2
3
The unit can be turned off automatically at a specified time.
1 Press TIMER/SLEEP so that "SLEEP" appears on
the display.
2 Within 4 seconds, press a.
3 Within 4 seconds, press f or g to specify
the time until the power is off.
Each time the button is pressed, the time changes between 5
to 240 minutes in minute steps.
Specified time
To check the time remaining before the power is turned
off
Press TIMER/SLEEP.
The remaining time is displayed for 4 seconds.
To cancel the sleep timer
Press TIMER/SLEEP so that "SLEEP" appears on the display,
and within 4 seconds, press s.
a
f,g
En
17
ENGLISH