Led And Function - TXED BIKE E-FOLDING XV Instrucciones De Uso

* Press the key and turn it anti clockwise from 6 o'clock to 12 o'clock position. (refer Fig 4.2)
* Remember to take off and care about the key after you withdraw the battery from the carrier!!!

5. LED and Function:

5.1 6Km/h button with a red circle, see (fig 5):
The bike can be power-assistance at the speed
of 6 km/h when you keep pressing this button.
After the motor starts working and the bike
running, you could easily pedal and release the button.
5.2 Power Display on Handlebar Panel:
Under normal state, turn on the power supply, the four LED lights will be displayed from low to high power
levels. When all LED lights are bright, this condition indicates that the electricity is full. If only the last light is
bright, this is a warning, power is getting low to set off soon, the battery need to be charged immediately.
5.3 Select Assistance Level on handlebar Panel:
When the power is on, you can shift to 3 assistance levels, low, middle and high. Press the button "+" and "-",
to shift the assistance level (Low, middle, and high). Here is the way how to set the assistance level:
When the power is on, the "middle" LED is on, which means the power-assistance is in the 2
can press the "+" and "-" buttons to choose the Low, Middle and High.
(Fig4.3)
(Fig4.4)
(Fig4.5)
(fig5)
nd
grade. Then you
10/85