Main Components - SOLAC CE4494 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 1
ENGlISH
de of the appliance used for protection during
transport or for sales promotions, such as pa-
per or plastic bags, plastic sheets, cardboard
and stickers.
Make sure that there is water in the tank, be-
fore connecting the coffee maker.
Do not touch the appliance with wet hands
when in operation.
Do not use the appliance on wet surfaces or
outdoors.
The appliance must be connected to a power
socket with a suitable ground connection.
Do not release the filter holder while coffee is
coming out.
Steam and water may sometimes emerge
from the coffee outlet. This is not a sign of a
fault or malfunction.
This espresso coffee maker is a high pressure
model (up to 19 bar) and has a built-in electric
pump to draw out the maximum flavour and
aroma from the coffee. It is therefore normal
for the electric pump to make a little noise and
vibrate when it comes into operation.

MAIN COMPONENTS

1
ON/OFF button with luminous indicator
2
Coffee outlet button(one cup)with luminous
indicator
3
Coffee outlet button(one cup)with luminous
indicator
4
Filter holder
5
1 cup filter (7g max)
6
2 cup filter (14g max)
7
E.S.E capsule fillter
8
Coffee outlet holes
9
Cup warmer
10 Steam nozzle
11 Steam nozzle protector
12 Filter holder guide
13 Top cover
14 Water tank (1,220 ml)
15 Steam nozzle control
16 Cup holder tray
17 Coffee scoop
TIPS
Before using the coffee machine for the first
time, we recommend allowing the equivalent
of 8-10 cups of water to run through the filter
holder (with no coffee in the filter). This com-
pletely cleans the entire system.
Getting the right espresso for every user's tas-
te is a result of the type of coffee, the dose
and the pressing:
We recommend you choose your preferred
coffee blend, one with a fine grind especially
for espresso.
The result will vary considerably according
to the quantity of coffee used. If you want a
strong coffee, you can exceed the dispenser
spoon amount and fill the filter holder to the
top.
Finally, we recommend that you press the
coffee to extract all the coffee essences and
improve the cream.
Coffee should always come out of the filter
holder in a regular stream, without dripping. If
not, both the quantity of coffee and the pres-
sing should be reduced or the coffee grind
adjusted.
We recommend that you make the coffee as
soon as the indicator light turns blue to ensure
a higher temperature.
SERVICE:
Any misuse or failure to follow the instructions
for use renders the guarantee and the manu-
facturer's liability null and void.
USE
A- COFFEE
Initial use
The boiler may come empty from the factory. Fill
the boiler for initial use of the coffee maker. With
the coffee maker cold, perform a system refill cy-
cle. To do this:
1 ill the tank with cold water. The tank (14) can
be removed via the back of the coffee maker
or open the lid (13) and pour the water in di-
rectly.
2 Plug the appliance into the mains
3 Press the ON/OFF button (1) The luminous
indicator (1) will flash.
4 Press the ON / OFF (1). Pilot lights turns fixed.
While heated, the rear lights flash . Once they
remain fixed:
5 Press the coffee outlet button (2/2) The pump
will begin to operate. The water will start to
come out through the coffee outlet.
6 Allow the water to circulate for a few seconds.
The coffee maker is now ready for use.
Switching on
1 Fill the tank with cold water. The tank (14) can
be removed via the back of the coffee maker
10
EN

Publicidad

Tabla de contenido
loading

Tabla de contenido