Technical Data; Environment Protection - Clatronic PSM 3419 Instrucciones De Servicio

3. Remove the jammed grains/corns with a soft brush.
4. Turn the wing nut clockwise with gentle pressure on the shaft.
5. Adjust the desired grinding grade.
NOTE:
Components may have come loose. If this is the case, re-assemble the unit following the
instructions below.
Assembling the grinding mechanism
• Refer to the assembly overview on page 3. If necessary, the components must be
placed onto the shaft in the following sequence:
1. Washer (5)
2. Spring (6)
3. Adapter (7)
4. Grinding mechanism (8) including adapter (9)
• Turn the wing nut clockwise with gentle pressure on the shaft.
• Adjust the desired grinding grade.
Model: .........................................................................................................................PSM 3419
Power supply: ....................................................................6 batteries 1.5 V Type "AAA" / "R03"
Net weight: ..................................................................................................................... 0.35 kg
Subject to technical changes without prior notice!
This device has been tested according to all relevant current CE guidelines, such as electro-
magnetic compatibility and low voltage directives, and has been constructed in accordance
with the latest safety regulations.
Before disposal, remove the batteries from the unit.
At the end of the service life of the unit, do not dispose of the unit with nor-
mal household waste. Take it to a designated collection point for disposal.
This helps to protect the environment.

Technical Data

Environment protection

GB
41