Descargar Imprimir esta página

Maintenance - Wavetek Meterman DM2 Manual De Instrucciones

Publicidad

Idiomas disponibles

Idiomas disponibles

AC Volts
Ranges:
Accuracy:
OL Protection:
DC Current
Ranges:
Resolution:
Accuracy:
Voltage Burden:
OL Protection:
Resistance
Ranges:
Accuracy:
Other Ranges:
OL Protection:
Diode Test
Test Current:
Test Voltage:
WARNING!
To prevent electrical shock hazard, turn off the multimeter and any device
or circuit under test and disconnect the test leads before removing the
battery hatch to the rear cover.
Troubleshooting
If there appears to be a malfunction during the operation of the meter, the
following steps should be performed in order to isolate the cause of
the problem:
1. Check the battery.
2. Review the operating instructions for possible mistakes in operating
procedure.
3. Inspect and test the test probes for a broken or intermittent connec-
tion.
200V, 500V
1.2% RDG + 10 Digits
500VAC RMS/500VDC
200 A, 2mA, 20mA, 200mA
100nA
1.2% RDG + 1 Digit
350mV max
.8A/250V fuse
200Ω, 2kΩ, 20kΩ, 200kΩ, 2MΩ
200Ω Range:
1/8% RDG + 4 Digits
1.2% RDG + 2 Digits
500VAC/VDC all ranges
1.0 0.6mA
3.2VDC max

MAINTENANCE

– 8 –

Publicidad

loading