Tabla de contenido
Publicidad
MP8610BT
Operation (continued)
Operation (continued)
Audio Menu (continued)
Audio Menu (continued)
3D Gain
3D Gain
00
01
02
03
04
05
06
07
08
09
10
11
12
Because speakers are installed in different positions depending on the vehicle design, the 3D-
Because speakers are installed in different positions depending on the vehicle design, the 3D-
Surround effect may vary from one vehicle to the next. The 3D Gain Function creates a "Virtual
Surround effect may vary from one vehicle to the next. The 3D Gain Function creates a "Virtual
Speaker" to compensate when speakers are not installed in the ideal position, giving you the
Speaker" to compensate when speakers are not installed in the ideal position, giving you the
best possible 3D-Surround sound effect.
best possible 3D-Surround sound effect.
When in the 3D Gain menu, use the up (+) or down (-) joystick button to turn the 3D Gain "ON"
When in the 3D Gain menu, use the up (+) or down (-) joystick button to turn the 3D Gain "ON"
or "OFF". Once the 3D Gain option is turned on, use the left ( ) joystick button to move to the
or "OFF". Once the 3D Gain option is turned on, use the left ( ) joystick button to move to the
Level ajustment parameter. Use the up (+) or down (-) joystick button to adjust the 3-D Gain
Level ajustment parameter. Use the up (+) or down (-) joystick button to adjust the 3-D Gain
Level from "0" to "12".
Level from "0" to "12".
To achieve the best effect, adjust the level until it suits your individual preference.
To achieve the best effect, adjust the level until it suits your individual preference.
NOTE: For quick access to "3D GAIN" once inside the Audio menu, press 7.
NOTE: For quick access to "3D GAIN" once inside the Audio menu, press 7.
Balance/Fader
Balance/Fader
When in the BAL/FAD menu, use the left ( ) or right ( ) joystick button to adjust the Fader
When in the BAL/FAD menu, use the left ( ) or right ( ) joystick button to adjust the Fader
Range from "F10" to "R10" ("C00" represents an equal balance between the front and rear
Range from "F10" to "R10" ("C00" represents an equal balance between the front and rear
speakers). Use the up (+) or down (-) joystick button to adjust the Balance Range from "L10" to
speakers). Use the up (+) or down (-) joystick button to adjust the Balance Range from "L10" to
"R10" ("C00" represents an equal balance between the left and right speakers).
"R10" ("C00" represents an equal balance between the left and right speakers).
NOTE: For quick access to "BAL/FAD" once inside the Audio menu, press 8.
NOTE: For quick access to "BAL/FAD" once inside the Audio menu, press 8.
Beep Tone
Beep Tone
When the Beep Tone feature is activated, an audible beep tone will be heard each time a
When the Beep Tone feature is activated, an audible beep tone will be heard each time a
button is pressed on the face of the radio. The Beep Tone is turned "ON" by default. When in
button is pressed on the face of the radio. The Beep Tone is turned "ON" by default. When in
the BEEP TONE menu, use the up (+) or down (-) joystick button to turn the Beep Tone "ON" or
the BEEP TONE menu, use the up (+) or down (-) joystick button to turn the Beep Tone "ON" or
"OFF".
"OFF".
NOTE: For quick access to "BEEP TONE" once inside the Audio menu, press 9.
NOTE: For quick access to "BEEP TONE" once inside the Audio menu, press 9.
18
Publicidad
Tabla de contenido
