Jensen MP8610BT Manual Del Usuario página 20

Operation (continued) Operation (continued)
Dual Zone Operation Dual Zone Operation
Dual Zone (2- ZONE), the first function on the audio menu, is turned "Off" by default. To turn Dual Zone (2- ZONE), the first function on the audio menu, is turned "Off" by default. To turn
Dual Zone on, press the AUDIO button (4) to access the Audio Menu. Within ten seconds of Dual Zone on, press the AUDIO button (4) to access the Audio Menu. Within ten seconds of
accessing the audio control menu, press the up (+) joystick button to turn the Dual Zone accessing the audio control menu, press the up (+) joystick button to turn the Dual Zone
function "ON". The audio output is muted for about 1 second after "ON" is selected. function "ON". The audio output is muted for about 1 second after "ON" is selected.
Default Settings when Dual Zone is "ON" Default Settings when Dual Zone is "ON"
• • The default source for the front zone is "Tuner" The default source for the front zone is "Tuner"
• • The default source for the rear zone is "CDP". The default source for the rear zone is "CDP".
• • The default Volume level is "12" for both front and rear zone audio output. The default Volume level is "12" for both front and rear zone audio output.
• • The LCD display is defaulted to display the front zone mode. The LCD display is defaulted to display the front zone mode.
NOTE: When Dual Zone is "ON", the Bass, Treble, Middle, Balance, Fader, Sub-woofer, NOTE: When Dual Zone is "ON", the Bass, Treble, Middle, Balance, Fader, Sub-woofer,
Loudness, and 3DGain features cannot be modified. Loudness, and 3DGain features cannot be modified.
Selecting Rear/Front Sources Selecting Rear/Front Sources
To select different front/rear sources, press the left ( ) or right ( ) joystick button (7 or 8) to To select different front/rear sources, press the left ( ) or right ( ) joystick button (7 or 8) to
move to the "Rear" or "Front" zone fields. Press the up (+) or down (-) joystick button to move to the "Rear" or "Front" zone fields. Press the up (+) or down (-) joystick button to
navigate through the following modes: Tuner > CDP > CDC > AUX. navigate through the following modes: Tuner > CDP > CDC > AUX.
"AUX" and "CDC" are considered the same source when Dual Zone is activated. If the rear or "AUX" and "CDC" are considered the same source when Dual Zone is activated. If the rear or
front source is set to "AUX" or "CDC" mode, the other zone cannot be set to "AUX" or "CDC". front source is set to "AUX" or "CDC" mode, the other zone cannot be set to "AUX" or "CDC".
The highlighted bar remains on the selected mode for ten seconds or until another field is The highlighted bar remains on the selected mode for ten seconds or until another field is
selected. After ten seconds, the menu disappears and Dual Zone is activated. selected. After ten seconds, the menu disappears and Dual Zone is activated.
NOTE: You can select front and rear sources even when Dual Zone is turned "OFF". NOTE: You can select front and rear sources even when Dual Zone is turned "OFF".
Default Settings when Dual Zone is "OFF" Default Settings when Dual Zone is "OFF"
When Dual Zone is turned off, the default audio output reverts to what the user selected for the When Dual Zone is turned off, the default audio output reverts to what the user selected for the
front zone source. For example, while Dual Zone was turned "ON ", the user selected "CDP" front zone source. For example, while Dual Zone was turned "ON ", the user selected "CDP"
for the front zone and "Tuner" for the rear zone. Once Dual Zone is turned "OFF", audio output for the front zone and "Tuner" for the rear zone. Once Dual Zone is turned "OFF", audio output
for all 4 speakers becomes "CDP". for all 4 speakers becomes "CDP".
Controlling the Front and Rear Sources Controlling the Front and Rear Sources
The front panel and remote control are defaulted to control the front source. When DUAL The front panel and remote control are defaulted to control the front source. When DUAL
ZONE is turned on, the MODE button (2) is used to change between the front and rear ZONE is turned on, the MODE button (2) is used to change between the front and rear
sources. Press the MODE button repeatedly to change between front and rear mode. sources. Press the MODE button repeatedly to change between front and rear mode.
To control the rear source, press the MODE button (2) to access the rear source. The LCD To control the rear source, press the MODE button (2) to access the rear source. The LCD
displays the rear source mode for ten seconds. You must make any desired changes to the displays the rear source mode for ten seconds. You must make any desired changes to the
rear zone source within ten seconds, or the LCD automatically returns to the front source and rear zone source within ten seconds, or the LCD automatically returns to the front source and
the front panel and remote resume control of the front zone source. the front panel and remote resume control of the front zone source.
NOTE: Regarding BLUETOOTH operation, the audio output for an incoming or outgoing NOTE: Regarding BLUETOOTH operation, the audio output for an incoming or outgoing
call is for all 4 speakers (front and rear), regardless of whether "2-ZONE" is "ON" or call is for all 4 speakers (front and rear), regardless of whether "2-ZONE" is "ON" or
OFF". OFF".
Dual Zone "OFF"
Zona Dual Apagada "Off"
Zone Double en arrêt
Default Settings for Dual Zone "ON"
Configuración Predeterminada para Zona Dual Apagada
Réglages par défaut pour le Zone Double en arrêt
Tuner Display with Dual Zone "ON"
Pantalla de Radio con Zona Dual Encendida
Affichage Tuner avec Zone Double en marche
20
MP8610BT