Publicidad
Idiomas disponibles
Idiomas disponibles
KPA-01 MINI
AC/DC TRUE RMS CLAMP METERAC/DC
Safety
International Safety Symbols
This symbol, adjacent to another symbol or terminal,
indicates the user must refer to
the manual for further information.
This symbol, adjacent to a terminal, indicates that,
under normal use, hazardous
voltages may be present
Double insulation
SAFETY NOTES
• Do not exceed the maximum allowable input range of any
function
• Do not apply voltage to meter when resistance function is
selected.
• Set the function switch OFF when the meter is not in use.
WARNINGS
• Set function switch to the appropriate position before measuring.
• When measuring volts do not switch to current/resistance modes.
• When changing ranges using the selector switch always
disconnect the test leads from the
circuit under test.
• Do not exceed the maximum rated input limits.
CAUTIONS
Improper use of this meter can cause damage, shock, injury or
death. Read and understand
this user manual before operating the meter.
Always remove the test leads before replacing the battery.
Inspect the condition of the test leads and the meter itself for any
damage before operating the
meter. Repair or replace any damage before use.
2
www.grupotemper.com
Publicidad
