Publicidad
Idiomas disponibles
Idiomas disponibles
KPA-01 MINI
AC/DC TRUE RMS CLAMP METERAC/DC
Use great care when making measurements if the voltages are
greater than 25VAC rms or
35VDC. These voltages are considered a shock hazard.
Remove the battery if the meter is to be stored for long periods.
Always discharge capacitors and remove power from the device
under test before performing
Diode, Resistance or Continuity tests.
• Voltage checks on electrical outlets can be difficult and
misleading because of the uncertainty
of connection to the recessed electrical contacts. Other means
should be used to ensure that
the terminals are not "live".
• If the equipment is used in a manner not specified by the
manufacturer, the protection
provided by the equipment may be impaired.
Input Limits
Function
A AC, VDC
V DC, V AC
Resistance, Continuity Test
Maximum Input
200A (PEAK 282.8A)
600V DC/AC
600V DC/AC
Meter Description
1. Current clamp & Non-contact AC voltage detector probe tip
2. Flashlight
3. Non-contact AC voltage(NCV) indicator light
4. Flashlight on/off button
www.grupotemper.com
3
Publicidad
