Honeywell Domonial Manual De Uso página 12

To adjust beep level :
• Press the total set arming key
• Press the 8 key
• Enter beep level from 1 to 7
A double beep on the keypad will confirm the change
To exit programming :
• Press the "off" key
WARNING: The system will automatically exit programming mode after 15 seconds if no keys
have been pressed and the red light will turn off. If this occurs you must restart this process
from the beginning.
Total set arming
Part set arming
Annex set arming
Disarming
Disarming under duress
Alert
Enter programming
Change user code
Change user TAG
Change beep level
Exit programming
+ CODE or TAG
+ CODE or TAG
+ CODE or TAG
Enter CODE or present TAG
Enter DURESS CODE = CODE + 1
+ + MASTER CODE OR MASTER TAG
User ID 0-9 + enter new CODE
+ enter new CODE again
User ID 0-9 + present new TAG
+ + enter beep level 1-7
- 11 -
E
N
G
L
I
S
H