Loading Silverwarebasket - Haier ESD300 Manual Del Usuario

LOADING SILVERWAREBASKET
Load the silverware basket while it is in the bottom rack or remove the basket
and place on a counter or table for loading. ( See recommended loading pattern
shown )
NOTE: Unload or remove the basket before unloading the racks to avoid spilling
water droplets on the silverware.
, Load items with covers down, using the separators to prevent silverware
nesting.
, Place small items such as baby bottle caps,,jar lids, corncob holders, etc. in the
section(s) with hinged cover(s). Close the cover to hold small items in place.
, When covers are up, mix items in each section of the basket with some
pointing up and some down to avoid nesting. Spray cannot reach nested items.
iMPORTANT : Always load sharp items ( knives, skewers, etc. ) pointing down.
NOTES:
, Do not load silver or silver-plated silverware with stainless steel. These metals
can be damaged by contact with each other during washing.
, Some foods ( such as salt, vinegar, milk products, fruit juices, etc. ), can pit or
corrode silverware. Run a rinse cycle if you do not have a full load to wash
immediately.
12