Adding Items Duringa Cycle; Option Selections - Haier ESD300 Manual Del Usuario

ADDING iTEMS DURING A CYCLE
You can add an item anytime before the main wash starts. Open the door and
check the detergent dispenser If the cover is still closed, you can add items.
To add items
1. Lift up the door latch to stop the cycle. Wait for the spraying action to stop
before opening the door
2. Open the door. If the detergent dispenser cover is still closed, add the item.
3. Close the door firmly until it latches. The dishwasher resumes the cycle after
about a 5-second pause.
OPTION
SELECTIONS
You can customize your cycles by pressing an option. If you change your mind,
press the option again to turn the option off.
Select a different option if desired.
You cancel change an option anytime before selected option begins.For
example,you can press an unheated drying option anytime before drying begins.
Hi=Temp Wash
Select this option to heat the water during parts of the cycle. Higher water
temperatures helps clean tough soils. Hi-Temp Wash, with the Pots &
Pans,Normal raises the water temperature in the main wash.
This option adds heat, water and wash time to a cycle.
0
Hi Temp
Wash
NOTE: Hi-Temp Wash is an option with the Pots & Pans and Normal cycles.
Always use Hi-Temp Wash if you have hard water.
Sanitize Rinse Option
Select this option to raise the water temperature in the final rinse to
approximately 160 F ( 71 °C ). The Sanitize Rinse Option adds heat and time to
the cycle. This high temperature rinse sanitizes your dishes and glassware in
accordance With NSF/ANSI standard 184 for Residential dishwasher. Certified
residential dishwasher are not intended for licensed food establishments.
o
©
Sanitize Rirlse
NOTE: Anti-Bacterial Wash automatically uses this option. Sanitize Rinse is an
option with the Pots & Pans and Normal cycle. Only these sanitization cycles have
been designed to meet the NSF/ANSI requirements.
20