Canceling A Cycle; Changinga Cycle Or Setting - Haier ESD300 Manual Del Usuario

CANCELLING
A CYCLE
Anytime during a cycle, press
Cancel
Cancel
If your dishwasher has a dual-digit display, it shows
Time Remaining
Your dishwasher will start a 2-minute drain (if needed). Let the dishwasher drain
completely. The light turns off after 2 minutes.
NOTE: If your dishwasher does not need draining, press CANCEL again to turn
the light turns off. Select a new cycle and options.
To stop the drain
You can press CANCEL again to stop the drain immediately.
Remember to drain the dishwasher before starting a new cycle.
To clean the indicators
Press CANCEL before starting the dishwasher to clean all options and cycles.
CHANGING A CYCLE OR SETTING
During the first fill of a cycle
1. Press a new cycle and/or options.
2. Check the detergent dispensers.They must be filled properly for the new cycle.
After the first fill of a cycle
1. Press
C_nCe I
Cancel
If your dishwasher has a dual-digit display, it shows
Time Remaining
Your dishwasher will start a 2-minute drain (if needed). Let the dishwasher drain
completely. The light turns off after 2 minutes.
NOTE: If your dishwasher does not need draining,press CANCEL again to turn
the light off.
1. Check the detergent dispensers. They must be filled properly for the new cycle.
2. Press a new cycle and/or options.
19