Declaration Of Incorporation - GF EA 04 Manual Instrucciones

Declaration of incorporation

12 Declaration of incorporation
CE Declaration of incorporation for incomplete machines (Machinery directive
2006/42/EC, Annex II B) and CE declaration of conformity as per EMV- and low
voltage directive (2004/108/EG), (2006/95/EG)
Manufacturer:
Georg Fischer Piping Systems Ltd., Ebnatstrasse 111, 8201 Schaffhausen /
Switzerland
Person authorised to compile technical documentation:
Georg Fischer Piping Systems Ltd., R&D Manager,
Ebnatstrasse 111, 8201 Schaffhausen / Switzerland
We hereby confirm that the following incomplete machine
Electrical actuator
Type: EA04 10Nm, EA04 20Nm
Variants: 24V AC/DC, 100-230V AC
Article numbers: 198 151 480, 198 151 481, 198 151 482, 198 151 483
fulfils all the basic requirements of the machine directive 2006/42/EC, as far as the
scope of delivery allows.
We further declare that the special technical documentation has been compiled in
accordance with Annex VII, Section B of this directive. We shall forward this, if
requested, to the competent authorities via the aforementioned authorised person.
Commissioning is prohibited until it has been established that the entire machine,
into which the aforementioned incomplete machine is to be incorporated, meets the
provisions of the machine directive 2006/42/EC.
The incomplete machine also meets the requirements of the following European
directives and the national legal provisions implementing them and the relevant
harmonised standards below:
 EN12100-1:2003
 ISO 5211:2001
 Electromagnetic compatibility – Directive EMV (2004/108/EG)
 Low voltage directive (2006/95/EG)
Name: Antonio De Agostini
Position: R&D Manager
Georg Fischer Piping Systems
Date: 2013-08-20
42

EN12100-2:2003
 EN60204:2006
Electrical actuator type EA04