Adjusting The Arm Support - Vermeiren V200 Manual De Instrucciones

3.6

Adjusting the arm support

The arm support of your wheelchair can be adjustable in height and depth. The height of the
arm support can be adjusted in 3 positions.
Height armsupport to seat
22 cm (8.66 in.) (Standard)
23 cm (9.06 in.)
24 cm (9.45 in.)
The depth of the armrest can be adjusted in 3 positions.
Depth of the armrest
Front position
Middle position (Standard)
Back position
Adjust the height and the depth of the armrest as follow:
1. Remove both screws under the armrest.
2. Place the correct number of blocks under and above the tubes, see table 3.
3. Install the armrest with the required holes for depth adjustment.
Number of the blocks
under the tube
2
1
0
Table 4: Height of arm support
Back and middle
Front and middle
Table 5: Depth of armrest
Page 21
Number of blocks
between tube and
armrests
1
2
3
Used holes
Hole 2 and 4
E
V200
May 2010