Call Tones; Roger Beep On/Off; Auto Power Off - Topcom 7000 Manual De Usuario

12.9 Call Tones

A call tone alerts others that you want to talk.
a. Setting the Call Tone
10 different Call Tones can be selected.
• Press
• Press
tones.
• Press
b. Sending a call Tone
• Press briefly. The call tone will be transmitted for 3 seconds on the set channel.

12.10 Roger Beep On/Off

After the - button is released, the unit will send out a roger beep to confirm that you have
PTT
stopped talking.
To set the Roger Beep.
• Switch the unit off.
• Press and hold
To switch the Roger Beep off, follow the same instructions.
12.11 iVOX Selection
The PMR is capable of voice activated (iVOX) transmission. In iVOX mode, the radio will
transmit a signal when it is activated by your voice or other sound around you. iVOX
operation is not recommended If you plan to use your radio in a noisy or windy environment.
To activate iVox:
• Switch the unit off.
• Press and hold
• In the iVOX mode, the iVOX icon will be displayed.
• To switch iVox off, switch the unit off and on.
To change the iVox sensitivity.
• Press 4 times.
• Press or
• Press to confirm your selection and return to the standby mode.
PTT

12.12 Auto power off

To save energy, you can activate the Automatic Power Off function. In case you forgot to
Power Off the unit, it will switch Off automatically after the set time.
• Press
• Press
• Press
Topcom Twintalker 7000
3 times. CA will be displayed.
or to select another call tone or select '0' to enable call
to confirm your selection and return to the standby mode.
PTT
while turning on the unit by pressing and holding
PTT
.
to select the sensitivity (1 = lowest sensitivity)
5 times.
or to select the auto power off time (30, 60 or 90 minutes)
to confirm your selection and return to the standby mode.
PTT
while turning on the unit by pressing and holding
Topcom Twintalker 7000
.
9