Button Lock; Call Tones; Key-Tone On/Off; Roger Beep On/Off - Topcom TWINTALKER 1302 Manual De Usuario

TOPCOM TWINTALKER 1302
13.8

BUTTON LOCK

• Press and hold
SC
LOCK icon is displayed on the LCD Screen.
• Press and hold
TX RX

13.9 CALL TONES

A call tone alerts others that you want to talk.
a. Setting the Call Tone
5 different Call Tones can be selected.
• Press
SC
• Press
• Press
TX RX PTT
b. Sending a call Tone
Press briefly. The call tone will be transmitted for 3 seconds on the set channel.

13.10 KEY-TONE ON/OFF

When a button is pressed, the unit will beep briefly.
To set the key-tone.
• Press
SC
• Press
• Press
TX RX PTT

13.11 ROGER BEEP ON/OFF

After the - button is released, the unit will send out a roger beep to confirm that you have stopped talking.
PTT
To set the Roger Beep.
• Press
SC
• Press
• Press
TX RX PTT

13.12 HEADSET CONNECTION

The Twintalker 1302 can be used with an external microphone and speaker.
The connector is located under the protective rubber cover on the top of the unit.To attach the
external speaker/microphone headsets or earpiece, lift the rubber flap on the top of the unit to
expose the connector.
Insert the appropriate plug into the connector.
8
for 2 seconds to activate or deactivate the BUTTON LOCK mode. The BUTTON
again to deactivate BUTTON LOCK
2 times. CA will be displayed.
or to select another call tone or select OF to enable call tones.
to confirm your selection and return to the standby mode.
3 times. 'to' will be displayed.
to enable (ON) or disable the key-tone (OF).
to confirm your selection and return to the standby mode.
4 times. 'ro' will be displayed.
to enable (ON) or disable the Roger-Beep (OF).
to confirm your selection and return to the standby mode.
TOPCOM TWINTALKER 1302