Technical Specifications - Tunturi C60 Manual Del Usuario

G B
•
O W N E R ' S M A N U A L C 6 0
MALFUNCTIONS
Despite continuous quality control, defects
N OT E !
and malfunctions caused by individual components
may occur in the equipment. In most cases it's
unnecessary to take the whole device in for repair,
as it's usually sufficient to replace the defective
part. Always give the model, serial number of your
equipment and in case of malfunctions also conditions
of use, nature of malfunction and any error code.
When you encounter unusual behavior from the
device, simply turn the power off, wait 1 minute
and turn the power on. This should clear incidental
errors and ready the device for normal operation
again. If after you have reset the device by turning
the power off and on again, and the device is still
not operational, contact your local Tunturi dealer for
service.
If you require spare parts, always give the model,
serial number of your equipment and the spare part
number for the part you need. The spare part list
is at the back of this manual. Use only spare parts
mentioned in the spare part list.

TECHNICAL SPECIFICATIONS

Length .........................................146 cm
Width ...........................................65 cm
Height ..........................................157 cm
Weight .........................................82 kg
The C60 meets the requirements of the EU's EMC
Directives on electromagnetic compatibility (89/336/
EEC) and electrical equipment designed for use
within certain voltage limits (73/23/EEC). This
product therefore carries the CE label.
The North American versions (115 V) comply with
FCC requirements on electromagnetic compatibility
and are accordingly marked with the FCC label.
The North American versions also comply with the
following safety standards: UL 1647 and CSA C 22.2
No. 68-92.
The C60 crosstrainer meets EN precision and safety
standards (Class HA, EN-957).
Due to our continuous policy of product development,
Tunturi reserves the right to change specifications
without notice.
The instructions must be followed carefully
N OT E !
in the assembly, use and maintenance of your
equipment. The warranty does not cover damage
due to negligence of the assembly, adjustment and
maintenance instructions described herein. Changes
or modifications not expressly approved by Tunturi
Oy Ltd will void the user's authority to operate the
equipment!
We wish you many enjoyable trainings with your
new Tunturi training partner!
13