Troubleshooting; Warranty - Dometic ROLLERBLIND PRECISION Instrucciones De Montaje

Rollerblind Precision
9

Troubleshooting

Fault
Guide wire tension too low
Guide wire too short
Guide wire broken
Guide wire or side track blind not running
smoothly
Side track not vertical
Fabric rolls off sides of ends of roller
10

Warranty

The statutory warranty period applies. If the product is defective, please contact the
manufacturer's branch in your country or your retailer. You can find your authorised
customer service centre at dometic.com.
For repair and warranty processing, please include the following information when
you send in the product:
• The number on the product label located for BR versions on the tube under the
fabric, for MP versions on the back of the mounting profile and for CA versions on
the back of the cassette.
• A reason for the claim or description of the fault.
If it is not possible to return the product, please provide photographs or video
identifying the defect.
EN
Solution
➤ See chapter "Fitting the guide wire ver-
sions" on page 7.
➤ Order replacement guide wire, see
spares leaflet at dometic.com.
➤ Order replacement guide wire, see
spares leaflet at dometic.com.
➤ Check restraint positions and recess
dimensions.
➤ Check if the side tracks are fitted perpen-
dicular to the roller and parallel to each
other.
➤ Check if the guide wires or side tracks are
perpendicular to the roller and that the
roller is horizontal.
Troubleshooting
9