Cleaning And Maintenance; Troubleshooting - Dometic OCEANAIR SKYVENETIAN PRECISION Manual De Instrucciones

Skyvenetian Precision
6

Cleaning and maintenance

A
NOTICE!
Risk of damage
Be sure to clean the slats carefully. Aluminum slats in particular are sensi-
tive and can be bent or kinked if handled carelessly.
I
NOTE
Cleaning by professional cleaning personnel
The manufacturer cannot be held liable for improper cleaning methods
or agents used by professional cleaning personnel. The responsibility
lies with the cleaning company in this case.
➤ Dust the slats regularly with a dust rag, dust glove or a vacuum cleaner with a
brush attachment.
You can reach the curved undersides of the slats better with dust rags or dust
gloves than with a vacuum cleaner.
Only blinds with wooden slats:
➤ Wipe off stains with a soft, damp cloth as soon as they appear.
➤ Occasionally clean the entire blind with a damp cloth and a mild detergent. Make
sure that the cloth is not too damp, so that the wooden slats are not soaked.
7

Troubleshooting

Fault
A guide wire is loose.
A cord is loose.
The bottom rail hangs
down and cannot be
tilted.
The slats cannot be tilted. The tension of a tension-
EN
Cause
Guide wire is no longer
sufficiently tensioned.
Tensioning cord is no
longer sufficiently ten-
sioned.
The tension of a tension-
ing cord is insufficient.
ing cord is too high.
Cleaning and maintenance
Solution
➤ Add tension to the guide wire:
fig. 9, 0 and b.
➤ Add tension to the tensioning
cord: fig. 9, a and b.
➤ Add tension to the tensioning
cord: fig. 9, a and b.
➤ Relax the tensioning cord a little:
fig. 9, a and b.
5