Cleaning And Maintenance; Technical Specifications - HQ-Power VDL15BM Manual Del Usuario

• Familiarise yourself with the functions of the device before actually using it. Do not allow operation by unqualified
persons. Any damage that may occur will most probably be due to unprofessional use of the device.
• Use the original packaging if the device is to be transported.
• Only use the device for its intended purpose. All other uses may lead to short circuits, burns, electroshocks, crash,
etc. Using the device in an unauthorised way will void the warranty.
4. Installation
a) Bubble Liquid
- Only fill the tank when the device is unplugged from the mains.
- Pour bubble liquid in the tank on the front of the device. Only use water-based bubble liquid (such as VDLBL5).
Non-recommended bubble liquid (oil or grease based) may damage the bubble machine and will void the warranty.
b) Mounting the Device
• Have the unit installed by a qualified person, respecting EN 60598-2-17 and all other applicable norms.
• The construction carrying the device should be able to support 10 times the weight for 1 hour without deformation.
• The installation must always be secured with a secondary attachment e.g. a safety cable.
• Never stand directly below the device when it is being mounted, removed or serviced. Have a qualified technician
check the device before bringing it into service and have him check the entire installation once a year.
• Install the device in a location where people cannot reach it, walk by or be seated.
• Do not attempt to install the device yourself if you lack qualifications as improper installation may result in injuries.
• Make sure there is no flammable material within a 50cm radius of the device.
• Connect the device to the mains with the adapter or insert batteries. Don't connect it to a dimming pack.
• The installation has to be approved by an expert before the device is taken into service.
5. Use
Switch the device on or off with the switch at the back.

6. Cleaning and Maintenance

1. All screws should be tightened and free of corrosion.
2. The housing, visible parts, mounting supports and the installation location (e.g. ceiling, suspension, trussing)
should not be deformed, modified or tampered with e.g. do not drill extra holes in mounting supports, do not
change the location of the connections, ...
3. Mechanically moving parts must not show any signs of wear and tear.
4. The electric power supply cables should be undamaged. Have this device installed by a qualified technician.
5. Disconnect the device from the mains prior to maintenance activities.
6. Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
7. There are no user-serviceable parts.
8. Contact your dealer for spare parts if necessary.

7. Technical Specifications

Power Supply
Power Consumption
Tank Capacity
Dimensions
Total Weight
Max. Ambient Temperature
The information in this manual is subject to change without prior notice.
VDL15BM
3Vdc/800mA adapter (incl.) / 2 x 1.5V C-type batteries (LR14C, not incl.)
max. 15W
0.45 litre
280 x 180 x 155mm
0.8kg
45°C
VELLEMAN
- 4 -