en - Warning and Safety instructions
Blocked roller warning light
The indicator light on the Electrobrush
has two functions.
The light is
– yellow when the Electrobrush is
switched on.
– red, if the roller brush is blocked
(blocked roller warning light), for
example, when a large object has
been vacuumed up.
^ Disconnect the vacuum cleaner from
the electricity supply immediately the
red light comes on. Switch off at the
wall socket and remove the plug.
^ Remove the cause of the obstruction,
see "Cleaning and care".
Then wait for about two minutes, before
switching the cleaner back on again.
This allows the blocked roller warning
indicator to re-set itself.
10
Disposing of an old
Electrobrush
~
Make appropriate arrangements for
the safe disposal of your old
Electrobrush.
The manufacturer cannot be held
liable for damage caused by
non-compliance with these Warning
and Safety instructions.