Errors - Causes And Remedies - Soehnle 7801 Instrucciones De Uso

3. ERRORS – CAUSES AND REMEDIES
DISPLAY
If the error cannot be cleared, or other error messages appear, please contact your service
partner.
www.soehnle-professional.com
CAUSES
Underload: only dashes appear at the bottom
of the display field.
Overload: only dashes appear at the top of
the display field. Maximum weighing range is
exceeded.
Scales were not stabilised when switched on.
Taring not possible.
REMEDY
Switch the display off and on. The
zero point is reset automatically.
Unload the scales, or switch them off
and on again. The zero point is reset
automatically.
Check the surface under the scales,
and check that the weighing platform
is level. Test the scales with a force
shunt. If the error persists after
readjustment, please contact your
service partner.
Stand still, or stabilise the weight on
the scales.
13 von 69