Description, Main Components, Specifications - Rothenberger RO-GROOVER Instrucciones De Uso

DESCRIPTION, MAIN COMPONENTS, SPECIFICATIONS

1. Specifications
Description
• This machine makes circular grooves at the end of steel tubes in order to facilitate the assembly of circular
couplings. It is the ideal tool for the construction industry and the piping construction sector. The grooves are
made by a grooving roller which is inserted hydraulically inside the tube which, at the same time, is supported
by a guide screw.
The machine is equipped with two upper rollers and three lathe screws which can machine the following tubes
(refer to table 1 to see the suitable combination of roller and lathe screw to be used in each case):
1/2
from 1" - 1 " in diameter
from 2" - 6" in diameter
from 8" - 12" in diameter
24
Main components
1 Adjusting nut
2 Hydraulic cylinder
3 Roller slide
4 Drive shaft
5 Guard
6 Pipe stabilising roller
7 Mounting base
Specifications
Max. permitted diameter
Min. permitted diameter
Max. permitted tube thickness
Max. working pressure
Max. hydraulic cylinder pressure 40 Mpa
Oil tank capacity
Lathe screw speed
Electric motor
General dimensions
(W xD xH)
Weight
Standard equipment
Grooving machine with drive shaft and set of three grooving
rollers. Drive shaft and set of grooving rollers, for diameters 1" -
1 1/2 "; 2" - 6" and 8" - 12".
Tube stabiliser
The tube stabiliser is available as a support accessory for grooving.
ENGLISH
8 Handle body
9 Shut-off valve
10 Handle
11 Nut
12 Body of head
13 Motor cover
14 Control panel (electric)
12" (325 mm)
1" (33 mm)
10 mm
7850 kg
150 ml
36 r.p.m.
1500001351-1500W-230V-50Hz
1500001352-1500W-230V-60Hz
1500001353-1500W-110V-50Hz
474 x 910 x 635
32 lb