Equipment; Use - Gloria SOX 5 Instrucciones De Uso

● Attention!
Regarding the law of product liability,
we particularly point out that we are
not liable for damages caused by our
device as far as these damages have
been caused by improper repair or
by a part replacement when Brill
GLORIA original parts are not used,
and when the repair has not been
carried out by the after-sales-service
or by an authorized expert. This con-
cerns the accessories, too.

Equipment

● Pressure hose (B), fabricreinforced,
free length 130 cm.
● Quick-action valve (C),
spray tube (D) 80 cm long.
● Flat spray nozzle, spray angle 80°,
volume throughput 0.68 l per minute
at 2 bar, optimum spray pressure
between 1.5 and 3 bar (values relat-
ing to water).
● Piston-type pressure gauge (A) with
built-in safety valve.

Use

● The SOX 5 / 8 industrial unit is intended
to spray liquid cleaning agents that do
not attack the materials it is made of.
The maximum temperature is 30 °C.
● In practice, sprayed liquids are a
mixture of various substances whose
composition is only known to the
manufacturer. The suitability of the
unit for a specific liquid must there-
fore be determined before use by the
user in conjunction with the manu-
facturer of the substance.
The following is a basic guide for the
upper limits for more detailed testing
of acids or alkalis:
- nitric acid, acetic acid and propi-
onic acid up to 10%
- hydrochloric acid up to 10%,
limited to brief use only
- phosphoric and sulphuric acid up to
30%
- caustie potash and caustie soda up
to 20%
●
The unit is not suitable for use with the
following in particular:
- formic and hydrofluoric acid in any
concentration.
- acids and alkalis at concentrations
greater than the amounts quoted or
as mixtures.
- oils and fuels.
- wetting agents (surfactants) that
cause or could promote the forma-
tion of cracks in the plastics used.
- liquids at temperatures over 30 °C.
- inflammable liquids with a flash point
below 55 °C.
12