Remote Control Unit - Pioneer F-F6-J Manual De Instrucciones

Controls and displays
8 BAND
Selects DAB, FM or AM.
9 MENU
Use to enter/exit menu mode.
The unit times out if no operation is performed for
about five seconds after the menu mode is set.
10 TUNING/PRESET dial
Press this dial to select an option or execute a
command.
Turn this dial to select menu options, radio
presets or stations.
In the tuning mode, the reception frequency
can be tuned in an increasing or decreasing
direction. Turn the dial clockwise to change the
reception toward higher frequencies. Turn the
dial counterclockwise to tune the reception
toward lower frequencies.
In the preset mode, turning this dial moves the
selected preset channel

Remote control unit

1
1 2
2
4 5
7 8
MEMORY A.PRESET/A.TUNE
3
10
4
MENU
ST-
5
BAND
6
MPX
VOLUME
7
TUNER
Note
1 Noise may be generated when receiving AM, FM, or DAB broadcasting if a near-by television set is turned on. The tuner should
be used as far away from a television as possible.
2 Effective period of memory back-up is about a month under normal temperature.
1
2
up or down. The auto
8
DIMMER
DISP
9
3
A/B/C
10
6
D/E/F
9
G/H
I/J
11
TUNE+
ST+
12
ENTER
TUNE-
AMP CONTROL
13
MUTE
tuning operation cannot be used when in this
mode.
When inputting station names, use this dial to
select desired characters (page 18).
11 Remote sensor
12 DISPLAY
Use to select the display mode (page 18, 24).
13 AUTO TUNE
Press to active auto location of all available
DAB services.
Hold the button depressed for two seconds or
longer during DAB mode to perform full scan
operation (Full band and L-band).
Press the button briefly during DAB mode to
perform a local scan (UK band III) for UK
broadcast services (UK stations are in the
range of 11B to 12D).

1
Switches the unit between standby and on.
2 Station call buttons (1 to 10)
Use these buttons to preset stations, and to
recall previously preset stations.
3 MEMORY
Use to preset stations. This button is also used
for manual station-name character selection
for FM and AM broadcasts, and for Program
Type search.
4 MENU
Use to enter/exit menu mode.
5 BAND
Selects DAB, FM or AM.
03
11
En