Connections
Chapter 2:
Connections
Making cable connections
Make sure not to bend the cables over the top
of this unit (as shown in the illustration), since
the magnetic field produced by the unit's
transformers may cause a humming noise in
the speakers.
Important
• Before making or changing any
connections, switch off the power and
disconnect the power cord from the AC
outlet.
Connecting the antenna
terminals
Connecting an DAB outdoor antenna
• If good reception cannot be achieved with
the included DAB indoor antenna, use an
DAB outdoor antenna. Connect an F male
type connector to the coaxial cable and
connect the antenna to the DAB
ANTENNA terminal.
Note
1 Do not disconnect the AM loop antenna even if an external AM antenna is used.
Installing the DAB indoor antenna
•
DAB station reception (page 19).
•
Use "Tuning aid" to set position at which
reception sensitivity is optimum (page 22).
DAB indoor antenna assembly
Mount the antenna's screw to the stand.
Connecting antennas
Connect the AM loop antenna, FM antenna
and DAB indoor antenna as shown in the
illustration (page 8). To improve reception and
sound quality, connect external antennas
(See Connecting external antennas on
page 27).
02
1
7
En