safety or are instructed by such a person in how to use
the device.
•
do not pull the power cord or the device itself to
unplug it from the power socket.
•
the power plug is the separation element from the grid
power; keep the plug accessible when the device is in
use.
9.
Before plugging in the device, make sure that the electrical
rating, shown on the rating plate on the bottom of the unit,
corresponds to the mains rating.
10. In case the power plug provided with the device does not
fit your wall socket, address to qualified personnel for the
replacement of the plug with a suitable one. In general, the
use of adapters, simple or multiple, and/or extension cables
is not recommended. If their use is indispensable, it is neces-
sary to use types complying with safety regulations, paying
however attention that they do not exceed the maximum
power limits, indicated on adapters and extension cables.
11. Do not leave the unit plugged in when not in use; unplug the
device from the wall socket when it is not operated.
12. The installation must be carried out according to the in-
structions of the manufacturer. An improper installation can
cause damage to persons, animals or things, for which the
manufacturer cannot be held responsible.
13. The power cord of this device cannot be replaced by the
user. In case of a power cord damage, address to a technical
service centre authorized by the manufacturer for its repla-
cement.
14. The power supply cord should always be fully unwound in
order to prevent dangerous overheating.
27