Canon JX510P Guia Del Usuario página 38

Receiving with a DRPD (Distinctive Ring Pattern Detection) service:
<DRPD>
DRPD service assigns two or more telephone numbers with distinctive ring patterns to a single
telephone line, allowing you to have both a fax number(s) and a telephone number(s) using only
one telephone line. Your fax will automatically monitor incoming calls and based on the ring
pattern, will let you know if the call is a fax or voice call. Follow the procedure below to set the fax
ring pattern that matches the pattern assigned by your telephone company.
Note
<DRPD> is only available in some countries.
Contact your local telephone company for detailed information on this service.
1
Press [Menu].
2
Use [{] or [}] to select <DATA REGSTRATION>, then press [Start/Copy]. The
LCD displays <USER SETTINGS>.
3
Use [{] or [}] to select <RX SETTINGS>, then press [Start/Copy]. The LCD
displays <ECM RX>.
4
Use [{] or [}] to select <DRPD:SELECT FAX>, then press [Start/Copy]. The LCD
displays <DOUBLE RING>.
5
Use [{] or [}] to select the ring pattern that your telephone company assigned to
your fax number, then press [Start/Copy].
You can select <DOUBLE RING>, <SHORT-SHORT-LONG>, <SHORT-LONG-SHORT>,
<OTHER RING TYPE>, or <NORMAL RING>.
6
Press [Stop/Reset].
Setting ends and the fax returns to standby mode.
Canceling Receiving
1
Press [Stop/Reset].
Receiving Faxes 35