Choose The Installation Mode - Jole i-Anchor Advance Manual De Instrucciones

Choose the Installation Mode

Child's Installation
Mode
Size
Baby
40cm-105cm/
<
18.5kg mode
ECE
R129/00
80cm-105cm/ Toddler
<
18.5kg mode
Use Infant Insert
Detach the snaps on
the head support to
remove the head
portion of the insert.
We recommend using the full
infant insert while the baby
is under 60 cm or until they
outgrow the insert. The infant
insert increases side impact
protection.
11
Reference Recline
Installation
Age Position
Approx
Position
<4 years
1 -7
Approx
Position
15 months
1 -7
to
4 years
Remove the head support
portion of the infant
insert when the child's
head no longer fits
comfortably.
Remove the body
portion of the infant
insert when the infant's
shoulders no longer fit
comfortably.
1 Remove the infant insert
cushion by detaching the
snaps to allow more space
when the infant does not
fit comfortably. The cushion
can be used separately
2
without being attached to
the insert to bolster the
infant's back for more
comfort.
Installing the i-base advance for
use with the i-anchor advance
seat
Installation of i-size ISOFIX Base System
see images -
3 11
!
Insert the rebound bar downwards
until you hear a "click" which
means that the assembly is
complete. -1
3
After placing the i-Base Advance on
TM
the vehicle seat, extend the load leg
to floor , when the load leg
4
indicator shows green means it is
installed correctly. Red means it is
installed incorrectly.
5
!
The load leg has 24 positions.
When the load leg indicator shows
red this means the load leg is in the
wrong position.
!
Make sure the load leg is in full
contact with the vehicle floor pan.
!
Squeeze the load leg releasing
button, then shorten the load leg
upwards.
3
1
4
5
12