Panasonic EY6535 Manual De Instrucciones página 13

V
. ACCESSORIES
Use only bits suitable for size of drill's chuck.
Use Panasonic original Optional Keyless drill chuck (EY9X003E) and Quick change chuck
(EY9HX110E) for maximum performance.
VI
. SPECIFICATIONS
MAIN UNIT
Model
Wood drilling
Drilling
Metal drilling
Machine screw
Maximun
recommen Wood screw
Screw
ded
driving
Tech screw
capacities
Coach screw (Lag bolt)
Bolt Fastening
No load speed
Max Torque
Clutch Torque
Impact per minute
Motor
Square drive
Weight (with battery pack)
Overall length
KEYLESS DRILL CHUCK
Model
Chuck Capacity
BATTERY PACK
Model
Storage battery
Battery voltage
BATTERY CHARGER
Model
Electrical rating
Weight
1.2Ah
1.7Ah
Charging Time
2.0Ah
3.0Ah
3.5Ah
Note: This chart may include models that are not available in your area.
Please refer to the catalogue.
CAUTION: This Panasonic Multi Drill & Driver is designed to use only battery pack type EY9230,
EY9136. Use with other battery pack type may damage the tool and the battery, and may
result in the risk of fire and personal injury.
Drill driver Mode
ø 27 mm (1 - 1/16")
ø 13 mm (1/2")
Not feasible
0 - 650 /min (rpm)
22.6 Nm (230 kgf-cm)
1.0 Nm (10 kgf-cm, 8.7 in-lbs.) -
5.4 Nm (55 kgf-cm, 47.7 in-lbs.)
See the rating plate on the bottom of the charger.
7.2 V 9.6 V
EY9065, EY9066 EY9080, EY9086 EY9001, EY9006
20min.
EY9180, EY9182
25min.
EY9168
30min.
—
EY6535
(Caution: Do not use Keyless drill chuck for impact mode)
M5
ø 6.8 mm (17/64")
ø 6 mm (15/64")
ø10 mm (3/8")
Approx.
-
DC Motor 15.6V
12.7 mm (1/2") square drive with ball detent
2.2 kg ( 4.8 lbs.)
216 mm ( 8 - 1/2")
EY9X003E
1.6 mm - 13 mm (1/16" - 1/2")
EY9230
Ni-MH Battery
15.6V DC (1.2V x 13 cells)
EY0110
0.78 kg, (1.72 lbs.)
12 V 15.6 V
EY9101
EY9106 EY9136
30min.
EY9200 EY9230
45min.
EY9201 EY9231
55min.
—
13
Impact mode
Not feasible
Not feasible
Standard Bolt: M12
High Tensile Bolt: M10
0 - 2200 /min (rpm)
127.5 Nm (1300 kgf-cm)
at high tensile bolt fastening
-
0 - 3300 /min (ipm)
18 V 24 V
EY9117
60min.
EY9210
90min.
EY9251
65min.