Makita DMR104 Manual De Instrucciones página 7

The following tables indicate the operating time on a single charge.
7.2 V 9.6 V
BL7010
PA09
9050
9051
9100
9120
9100A
9102
9122
9102A
BH9020
BH9020A
9134
9135
BH9033
BH9033A
: Cluster battery
: Slide battery
Note:
Table regarding to the battery operating time above is for
reference. The actual operating time may differ with the
type of the battery, charging condition, or usage
environment.
WARNING:
Do not use two main batteries at the same time.
3-1. Installing or removing Slide battery cartridge (Fig. 4)
• To install the battery cartridge, align the tongue on the
battery cartridge with the groove in the housing and slip
it into place. Always insert it all the way until it locks in
place with a little click.
• If you can see the red indicator on the upper side of the
button, it is not locked completely. Install it fully until the
red indicator cannot be seen. If not, it may accidentally
fall out of the tool, causing injury to you or someone
around you.
Battery Cartridge Voltage
10.8 V 12 V
PA12
1250
1251
1200
BL1013 1220
1200A
1202
1222
1202A
BH1220
BH1220C
1234
1235
1235F
BH1233
BH1233C
14.4 V 18 V
PA14 PA18
1450 1850
1452 1852
1420 BL1815
BL1415
BL1415N BL1815N
1422 1822
BL1820,
BH1420
BL1820B
1434 1834
BH1427
1435 1835
BL1830,
1435F
BL1830B
BL1430,
BL1430B
BH1433
BL1840,
BL1440
BL1840B
BL1850,
BL1450
BL1850B
BL1460B BL1860B
• Do not use force when installing the battery cartridge. If
the cartridge does not slide in easily, it is not being
inserted correctly.
• To remove the battery cartridge, slide it from the tool
while sliding the button on the front of the cartridge or
pressing the buttons on both sides of the cartridge.
WARNING:
Do not use two main batteries at the same time.
3-2. Installing or removing Cluster battery cartridge
(Fig. 5-9)
• Pull the supporting bar to allow the battery to insert to
the terminal.
• To insert the battery cartridge, align the tongue on the
battery cartridge with the groove in the housing and slip
it into place.
• Release the supporting bar.
• To remove the battery cartridge, pull the supporting bar
and take the battery out of the terminal.
AT SPEAKER
OUTPUT =
50mW + 50mW
unit: Hour
Approx 4.5
Approx. 6.5
Approx. 9.0
Approx. 10
Approx. 14
Approx. 15
Approx. 17
Approx. 18
Approx. 24
Approx. 30
Approx. 36
7