Ground-Fault Circuit - Interrupter Protection; Extension Cord Usage; Pressure Washer Features; Functional Description - Snap-On 870552 Manual De Instrucciones

GROUND-FAULT CIRCUIT - INTERRUPTER PROTECTION

This Pressure Washer is provided with a Ground-Fault Circuit-
Interrupter (GFCI) built into the plug of the power supply cord. This
device provides additional protection from the risk of electric
shock. Should replacement of the plug or cord become necessary,
use only identical replacement parts that include GFCI protection.

EXTENSION CORD USAGE

Extension cords are not recommended for use with this product. Extension cords, if
used, must be properly grounded with a 3-prong plug on one and a 3-hole receptacle
on the other. DO NOT use grounding adapters with an extension cord. Extension
cords must be UL listed and use a minimum of 12 A.W.G. wiring. Extension cords
should never exceed 25 feet in length. Extension cords, that are too long, cause a volt-
age drop over the extra distance causing the motor to run slower with the possibility of
causing damage to the motor. Using extension cords with smaller than the recom-
mended wire gauge run the risk of getting too hot, melting, and/or causing fires.
9

FUNCTIONAL DESCRIPTION

PRESSURE WASHER FEATURES:

Gun
1.
2. Adjustable Nozzle
3. Wand
4. Wand Extension
5. Trigger
6. Trigger Safety Lock
7. Power Cord Intake
8. Handle
9. Pressure Washer
10. GFCI Power Cord
11. High Pressure Outlet (in back)
12. Garden Hose Coupling/Water Inlet
13. On/Off Switch (in back)
14. Nozzle Cleaning Needle
15. Pressure Hose
16. Detergent Bottle
17. Spray Head
10