Zibro A 40 Instrucciones De Uso página 45

B. INSTALLATION
AIR PURIFIER
Remove the front panel
Remove the screen filter
and the active carbon filter
First put the active carbon filter back into the device, followed by the HEPA - / E n z y m e -
filter (green side facing the front) and the screen filter.
Fasten the front panel by inserting the two hooks at the top into the recesses in the
device. Now click the bottom left and right of the front panel into position.
The device is now ready for use.

AT T E N T I O N !
The HEPA-/Enzyme-filter and activated carbon filter must be placed correctly in
order to guarantee correct operation.
REMOTE CONTROL
Open the cover on the back of the remote control
Insert the batteries, ensuring that the + and – poles are positioned correctly.
Close the cover.

AT T E N T I O N !
• Handle the remote control with care. It may stop working if it becomes wet or
is dropped or damaged in some other way.
• The maximum range is 7 metres.
• Incorrectly placed batteries may cause damage.
by pressing the push tabs
from the device and then remove the HEPA-/Enzyme-filter
Remove the packaging from both filters.
on both sides of the device.
4
45