Zibro A 40 Instrucciones De Uso página 48

Use this button to operate the timer function. To operate the timer, take the
following steps:

AT T E N T I O N !
The Timer setting will be deleted when you switch the device off with
the
P ress this button to activate a specially programmed pollen removal function.
The light
function off.
P ress this button to activate a specially programmed smoke removal function. The
light
off.

AT T E N T I O N !
The air quality is indicated on the display during air purification.
The higher the level of contamination in the air, the more lights will turn red.
There are separate indicators for the dust (
E. CLEANING
Switch off the air purifier and remove the plug from the socket before cleaning.
THE EXTERIOR
Clean the exterior with a soft, dry cloth. If the device is extremely dirty, use a mild cleaning
agent. Wipe the device with a slightly damp cloth. Never spray the device with water.
SCREEN FILTER
Clean the screen filter with a vacuum cleaner.
4
48
Switch the device on.
Press the button.
Light 1 at on the display will switch on, which means that the device will
switch off automatically after 1 hour. Press the
operating period of 2 or 4 hours. The appropriate light will switch on.
Press the button again to switch the timer function off.
button.
on the display will switch on. Press the
on the display will switch on. Press the
button again to set an
button to switch this
button to switch this function
) and odour ( ) status.