Technical Data - Hilti SF 10W-A22 Manual De Instrucciones

2.5 Power tool overloading and overheating indicator
The power tool is equipped with an electronic protection system to prevent overloading and overheating. The power
tool switches itself off automatically in the event of overloading and overheating. After releasing the control switch, the
power tool may not restart immediately when the switch is pressed again (while the power tool is cooling down).
LEDs light constantly
-

3 Technical data

Right of technical changes reserved.
Power tool
Rated voltage (DC voltage)
Weight in accordance with EPTA procedure 01/2003
Speed in 1st gear
Speed in 2nd gear
Speed in 3rd gear
Speed in 4th gear
Torque with tool set to drilling symbol (soft/flexible joint)
Torque range (15 settings)
Drilling diameter range in wood (hard)
Drilling diameter range in wood (soft)
Drilling diameter range in metal
NOTE
The vibration emission level given in this information sheet has been measured in accordance with a standardized test
given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment
of exposure. The declared vibration emission level represents the main applications of the tool. However if the tool is
used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total working period. An estimation of the level of exposure to
vibration should also take into account the times when the tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure level over the total working period. Identify additional safety
measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep
the hands warm, organization of work patterns.
Power tool
Typical A-weighted sound power level, L
Typical A-weighted emission sound pressure level, L
Uncertainty for the given sound level, K
Screwdriving without impact action, a
Drilling in metal, a
h,D
Uncertainty for triaxial vibration values (drilling), K
Battery
Rated voltage
Capacity
Weight
LEDs blink
LED 1, 2, 3, 4
WA
pA
h
B 22/1.6 Li‑Ion
21.6 V
1.6 Ah
0.48 kg
Power tool status
Power tool overloaded or
overheated
SF 10W-A22
21.6 V
2.7 kg
0...320/min
0...550/min
0...1,250/min
0...2,150/min
Max. 50 Nm
2...12 Nm
1.5...20 mm
1.5...50 mm
1.5...13 mm
SF 10W‑A22/SF 8M-A22
86 dB (A)
75 dB (A)
3 dB (A)
< 2.5 m/s²
< 2.5 m/s²
1.5 m/s²
B 22/2.6 Li‑Ion
21.6 V
2.6 Ah
0.78 kg
SF 8M-A22
21.6 V
2.7 kg
0...310/min
0...530/min
0...1,210/min
0...2,100/min
Max. 72 Nm
2...12 Nm
1.5...20 mm
1.5...32 mm
1.5...20 mm
B 22/3.3 Li‑Ion
21.6 V
3.3 Ah
0.78 kg
13
en