Koblenz U-800 Manual De Usuario página 6

Barredora tipo industrial
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

CHECKING THE EXHAUST FILTER:
The exhaust filter captures fine dust particles and purifies air
exiting your Vacuum Cleaner. Change the exhaust filter with
every third dust bag replacement, or as needed.
1. Depress handle release pedal to drop vacuum cleaner to
low position.
2. Push knob at side of exhaust filter cover to remove.
3. Remove soiled filter and replace with new one.
CHECKING THE EXHAUST FILTER:
1. Push the top latch on the exhaust filter cover to the right.
Slide the cover upwards.
2. Remove the soiled filter and replace it with a new one.
3. Reinstall exhaust filter cover and push the top latch to
the left.
O N / O F F S w i t c h :
Model U-800 & U-900 Vacuum Cleaners have a simple toggle switch on the dust comparment.
Push down ( - ) to start. Push down ( O ) to stop.
AUTOMATIC SELF-ADJUSTING CARPET NOZZLE:
The carpet nozzle height self adjusts instantly and automatically.
Your vacuum will float evenly over varying carpet pile heights.
HANDLE ADJUSTMENTS:
The handle of this vacuum cleaner can be set to any of three positions: Upright, middle or low.
1. To release the handle, step on the pedal at the left rear corner of the vacuum cleaner.
2. Upright position: handle locks in this position for vacuum cleaner storage. The handle should
always be in the upright position when cleaning tools are used.
3. Middle position: this position is for formal cleaning. While in the middle position, the front of the
nozzle can be raised by lowering the handle in order to cross room thresholds.
4. Low position: this position is used for cleaning under most furniture.
Model U-800
Model U-900
VACUUM OPERATIONS
-6-

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

U-900

Tabla de contenido