Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ON-BOARD CLEANING TOOLS:
Model U-900 is equipped with state-of-art,
on-board cleaning tools including:
extension wand
crevice tool
dusting brush
upholstery tool
SUCTION CONTROL:
1. To reduce suction when cleaning draperies, small rugs etc.. move the suction control
slide on the back of the vacuum cleaner by increasing the opening until desired suction
power is achieved. Close for normal vacuum operation.
REMOVE THE BOTTOM PLATE:
*CAUTION: Uplug the vacuum cleaner from the electrical outlet before servicing.
Use handle release pedal to place vacuum in low position. Turn vacuum over
to expose underside.
1. Slide the two latches inward to release bottom plate.
2. Slide bottom plate toward front of vacuum.
RESETTING THE THERMAL SWITCH:
The thermal switch protects the motor from overheating. If the motor stops due to prolonged use,
follow step 1-6.
1. Set power switch to the OFF position.
2. Unplug the power cord.
3. Wait about 10 min. to let the motor cool down.
4. Push the reset button lightly to the stop position.
5. Plug in the power cord.
6. Set power switch to the ON position.
Model U-900
To use:
1. Remove 2-piece telescopic wand from wand retainer.
2. Connect 2-piece telescopic wand to extension wand. Unlock wand collar to extend wand
to desired length.
3. Attach selected cleaning tool wand.
(Tools may also be attached directly to flexible hose cuff, omitting extension wand)
4. Cleaning tools are stored conveniently on the back of the vacuum cleaner body.
Snap tools back into their appropriate places.
-7-
Publicidad
Tabla de contenido
