Using The Controls; Viewing And Adjusting Temperature Set Points - KitchenAid KFIV29PCMS02 Guía De Uso Y Cuidado

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Using
the
Controms
The controls are located above the external dispenser.
IMPORTANT: The display screen on the dispenser control panel
will turn off automatically and enter "sleep" mode when the
control buttons and dispenser paddles have not been used for
2 minutes or more. Press any control button to reactivate the
display screen. The home screen will appear as shown.
Wait at least 24 hours between adjustments.
Recheck the
temperatures
before other adjustments
are made.
View
Temperature
Set Points
1. Press and hold TEMPERATURE for 3 seconds to activate
Temperature mode.
2. When Temperature mode is activated, press TEMPERATURE
to toggle between the Refrigerator zone and the Freezer
zone. The display will show the temperature set point of the
selected compartment,
as shown.
NOTE: When Temperature mode is activated, to view
temperatures
in degrees Celsius, press the LIGHT button,
under Units. To return the display setting to Fahrenheit, press
the LIGHT button again.
Recommended
Refrigerator
Temperature
Recommended
Freezer Temperature
Viewing and Adjusting Temperature
Set Points
For your convenience, your refrigerator and freezer temperature
controls are set to the recommended
set points at the factory.
When you first install your refrigerator, make sure the temperature
controls are still set to the recommended
set points. The
recommended
set points are 37°F (3°C) for the refrigerator and
0°F (-18°C) for the freezer.
IMPORTANT:
Wait 24 hours before you put food into the refrigerator. If you
add food before the refrigerator has cooled completely, your
food may spoil.
NOTE: Adjusting the set points to a colder than
recommended
setting will not cool the compartments
any
faster.
If the temperature is too warm or too cold in the refrigerator or
freezer, first check the air vents to be sure they are not
blocked before adjusting the controls.
The recommended
set points should be correct for normal
household use. The controls are set correctly when milk or
juice is as cold as you like and when ice cream is firm.
NOTE: Areas such as a garage or porch, may experience
hotter or colder temperatures
and higher humidity than inside
the home. You may need to adjust the temperature away from
the recommended
set points to accommodate
for these
conditions.
Adjust
Temperature
Set Points
Refrigerator set point range: 33°F to 45°F (0°C to 7°C).
Freezer set point range: -5°F to 5°F (-21°C to -15°C).
1. Press and hold TEMPERATURE for 3 seconds to activate
Temperature mode.
2. When Temperature mode is activated, press TEMPERATURE
to select the Refrigerator zone. The display will show the
temperature set point of the selected compartment,
as
shown.
3. Press LOCK, under plus, to raise the set point, or press
OPTIONS, under minus, to lower the set point.
4. When you have finished adjusting the refrigerator set point,
press TEMPERATURE to change the display to show the
freezer set point. When the zone has been changed,
"FREEZER" appears on the display screen.
19

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Kfis29bbms03

Tabla de contenido