Working - Stihl SE 61 Manual De Instrucciones

Switch off the vacuum cleaner and
N
the electric power tool that is to be
connected prior to connection to the
machine socket (1).
Switch positions
Switch position 0 – Vacuum cleaner is
switched off, the machine socket cannot
be used.
Switch position I – Vacuum cleaner is
switched on, the machine socket cannot
be used.
Switch position II – The electric power
tool connected to the machine socket
switches the vacuum on and off via the
automatic switch-on function.
The power consumption of the vacuum
is adjusted automatically when using
electric power tools with electronic
speed control.
To switch on, set master switch to
N
the corresponding switch position
SE 61, SE 61 E

Working

Vacuuming dry materials
WARNING
Flammable materials must not be
vacuumed.
Always make sure that the filter bag has
been fitted in the container before
vacuuming dry materials. The
vacuumed material can then be
disposed of without difficulty. Dry
materials can also be vacuumed without
filter bag.
NOTICE
Never use the vacuum cleaner with a
damaged filter element or without the
filter element.
Vacuuming liquids
WARNING
Flammable liquids must not be
vacuumed.
Always remove the filter bag and check
operation of the float before vacuuming
liquids. The float switches off the air
stream when the container is full. If the
machine is exclusively used for wet-
vacuuming, the filter element should be
replaced by a special insert (special
accessory).
The filter element is damp after
vacuuming liquids. The filter element is
likely to clog up more quickly if dry
material is vacuumed while it is still
damp. For this reason, the filter element
should be dried or replaced by a dry filter
element before vacuuming dry
materials.
Adjusting the suction power
The suction power can be adjusted if
required to avoid lifting light carpets etc.
from the floor:
Open slide on hand tube to reduce
N
suction power
English
27