Simultaneous Operation With Desktop - Phonic PAA3 Manual Del Usuario

SIMULTANEOUS OPERATION WITH DESKTOP

There are many advantages to being able to connect the
PAA3 with your desktop computer or notebook. It allows
remote operation of the PAA3, for one, which is particularly
useful when taking measurements in areas that require an
absense of any individuals. It also allows users to to save
and print data stored in the PAA3's memory.
The PAA3 software can be found on the website. With this
program, most functions are easily accessible through a
menu identical to that of the PAA3 device itself.
ATTENTION: When operating the PAA3 through a PC, it
is recommended that you make use of the power adapter
instead of batteries. Also, choose an optimal position for
the PAA3 to be placed before controlling the PAA3 with
your computer.
Installing the PAA3 software:
1. Navigate to the PAA3 page on www.phonic.com and
download the software at the bottom of the page.
2. Find paa3_setup.exe in the archive and double click
to begin installation.
3. Select an appropriate installation directory and click
"next" to continue. The PAA3 software will be installed
automatically.
PAA3
PAA3 ON LINE
Connection:
After installation, open the PAA3 software.
1.
Connect the PAA3 to your PC via the provided USB
2.
cable, then turn the PAA3 on.
Go to FILE, select ON LINE to connect to the
3.
PAA3. The data previously saved in the PAA3 will
immediately be uploaded.
As soon as uploading is finished, you may begin to
4.
operate PAA3 by moving the cursor of the mouse
and click the onscreen MENU to enter the various
functions of the PAA3.
Now that PAA3 is operating simultaneously with the
5.
PC. The functions being activated will show both on
the PAA3 and the PC or laptop.
Go to FILE and click ON LINE once more if you need
6.
to disable the PAA3's online operation.
Using the PAA3 on line:
The simple menu located below the FILE pull down
menu at the top left hand side of main PAA3 program will
allow users to access the PAA3's functions. This menu
is basically identical to that of the PAA3 itself, so as long
as you can navigate the PAA3 menu, you will be able to
navigate this one.
Display Type:
Clicking on the SPL METER (or LEVEL METER) button
to the right of the aforementioned menu will allow users
to switch the on screen display type between that of the
spectrum analysis and the meter display.
Memories:
Taking up most of the bottom half of the PAA3 program
window is the memory section. Here lists all stored
memories of the PAA3, downloaded to the computer. The
two tabs allow users to view either the RTA memories or
RT60 memories stored.
Backlight:
The backlight button to the right-hand-side of the PAA3
program will allow users to remotely active the PAA3's
backlight.
15