Descargar Imprimir esta página

LG WM3997H Serie Manual De Propietario página 12

Ocultar thumbs Ver también para WM3997H Serie:

Publicidad

Idiomas disponibles

Idiomas disponibles

12
INSTALLATION
INSTRUCTIONS
Checking
and
Choosing
the
Proper
Location
Install the washing
machine
on a solid floor that is
strong
and rigid enough
to support
the weight
of the
washing
machine,
even when fully
loaded,
without
flexing
or bouncing.
If the floor
has too much
flex,
you may need to reinforce
it to make it more
rigid. If
the floor
is not solid,
it may cause severe vibration
and noise.
1
Clean the floor before installation.
- Make sure to select solid and smooth
ground.
2
Two or more people are needed for moving
and
unpacking
the washing
machine.
3
Allow for sufficient
space between the walls and the
washing
machine for installation.
You must allow
sufficient
space for water
lines, the
drain
line, and airflow.
: @ NOTE
.....................................................................................................
' • Be sure to allow for wall, door, or floor moldings
i
that may incr he required clearances.
k....
J
@ NOTE
. The floor must be strong and rigid enough to
support the weight
of the washer, when fully
loaded, without
flexing
or bouncing.
If your floor
has too much flex,
you may need to reinforce
itto make it more rigid.
A floor that is adequate for a top-loading
washer
may not be rigid enough for a front loading
washer, due to the difference
in the spin speed and
direction.
If the floor is not solid, your washer may
vibrate and you may hear and feel the vibration
throughout
your house.
. Before installing
the washer, make sure the floor is
clean, dry and free of dust, dirt, water and oils so
the washer feet can not slide easily. Leveling feet
that can move or slide on the floor can contribute
to excess vibration
and noise due to poor contact
with the floor.
. If a drip pan must be used, take extra care to
follow the instructions
provided
with the drip pan
and make sure the leveling
feet are adjusted
for
firm and even contact with the pan. Use of drip
pans and failure to properly
level the machine
may result in increased vibration
and noise during
operation.
\ ....................................................................................................................................................................................
_22V4"_
I
(75.6 cm)
(
.
)
I_
293/4"
_1
(75.6
crn)
4--
:-@ NOTE
....................................
Refer to the instructions
packaged with the
optional
PEDESTAL or STACKING KIT before
[
installing
with a PEDESTAL or a STACKING KIT.
\ .....................................................................................................................................................................................
/

Publicidad

loading

Este manual también es adecuado para:

Wm3997hwa/00