Descargar Imprimir esta página

LG WM3997H Serie Manual De Propietario página 17

Ocultar thumbs Ver también para WM3997H Serie:

Publicidad

Idiomas disponibles

Idiomas disponibles

INSTALLATION
INSTRUCTIONS
17
Plugging
in 1"he Power
Cord
and
Grounding
Make sure to ground the washing
machine to prevent a
short circuit or an electric shock when plugging
in.
If plugged
into a grounded,
3-prong outlet rated for use
with this appliance,
no further grounding
is necessary.
A WARNING
o The power outlet
must be within 60 inches (1.5 m)
of either side of the washer.
o The appliance
and outlet
must be positioned
so
that the plug is easily accessible.
o Do not overload the outlet with more than one
appliance.
o The outlet must be grounded
in accordance
with
current wiring
codes and regulations.
o Time-delay
fuse or circuit breaker is recommended.
o It is the personal responsibility
and obligation
of
the product owner to have a proper outlet installed
by a qualified
electrician.
o Do not use a worn or damaged
power cord or
power plug. Replace or repair worn or damages
cords or plugs it immediately.
Failure to do so may
result in death, fire, electric shock, or malfunction.
o Do not modify
the power cord and take care not to
damage
it when installing
or moving the washing
machine.
Failure to follow this warning
may result
in death, fire, electric shock, or malfunction.
o Make sure that the washing
machine
is grounded.
o Connect this washing
machine to a grounded
outlet conforming
to the rating prior to use.
Failure to do so may result in fire, electric shock,
or malfunction.
o Do not use adaptors or extension
cords. The
washing
machine should
always be plugged
into its own individual
electrical
outlet which has
a voltage
rating that matches the rating plate.
Failure to do so may result in fire, electric shock or
malfunction.
o Do not damage or cut off the ground
prong of
the power cord. Doing so may cause death, fire,
electric shock, or product malfunction.
\
i
Test
run
Check if the washing machine
is properly
installed and
run a test cycle.
1
Load the washing
machine
with 6 pounds of laundry
(approximately
14 shirts).
2 Press the Power button and turn the cycle selector
knob to the right.
3
4
Press the Rinse+Spin
button to select Rinse+Spin.
Press the Start/Pause
button.
- The wash cycle starts.
Check if water is supplied,
that the washing
machine
does not rock or vibrate excessively,
and that it
drains well during
the spin cycle.
- If water leaks during
water supply, see page 14,
Connecting
the water lines, to connect them
properly.
- If the washing
machine rocks and vibrates
excessively,
see page 16, Leveling the washing
machine, to level it again.
- If the drain does not work, see page 15, Connecting
the drain line, to install it properly.

Publicidad

loading

Este manual también es adecuado para:

Wm3997hwa/00