LG WM3997H Serie Manual De Propietario página 37

MA NTENANCE 37
Has a house fuse blown, a circuit breaker
tripped, or a power outage occurred?
i i
The door does not open • Is the temperature in the tub too high?
when the cycle pauses or * Is the water level in the washer high?
finishes
, Problem ! Possible Causes _J Solutions
Wrinkling ii" tiDidfinished?y°u remove the load immediately after ii" finishes.Rem°ve the load immediately after it
i[ Did you overload the tub? i" Do not overload the tub.
Did you reverse the hot and cold water i, Hot water rinse can cause garments to
J inlets? wrinkle. Check the inlet hose connections.
L
' Power will not turn on i" Is the power cord plugged in properly? • Make sure that the plug is secured ina '
grounded 3-prong, 120 V (60 Hz) outlet.
• Reset the circuit breaker or replace the
fuse. Do not increase the fuse capacity. If
the problem is a circuit overload, have it
corrected by a qualified electrician.
• The washing machine has a safety lock
built into the door to prevent burning.
Leave the door closed and wait until the
door lock icon disappears from the display.
• Allow the washer to complete the
programmed cycle, or press the SPIN
button.
i The wash cycle time is i Is the washing machine overloaded? Are _, This is normaI. The washing machine
longer than usual other options added to the wash cycle? automatically adjusts the cycle time for
J J
It is musty or moldy in the
tub
Has the incorrect detergent been used?
Did you clean the tub periodically?
the amount of laundry, water pressure,
water temperature, and other operating
conditions.
• Use only HE (High-Efficiency) detergent
recommended for a front-loading washing
machine.
, ee page 30, clean the inside and outside
of the washing machine periodically.
SPECIFICATIONS
Model WM3997H*A
, Description , Front loading washing machine
Electrical requirements 120 VAC @ 60 Hz
t
Dimensions 68.6 cm(W) x 75.6 cm(D) x 98.3 cm(H) 129.5 cm (D, door open)
, 27"(W) x 29 3/4"(D) x 3811/16"(H) / 51" (D, door open)
, Net weight ,96 kg(2111bs)
Max. spin speed .1300 rpm max
Max. water pressure .14.5- 142 PSI (100- 980 kpa)