Description/ Scope Of Delivery - Earlex HV2501EU Manual De Instrucciones

HV2501EU
Attention! Never operate the device if the nozzle seal is either
damaged or missing. If the nozzle seal is either missing or damaged
liquids can enter the device and increase the risk of an electric shock.
Check the nozzle seal before each use.
•
Do not use the spray guns to spray flammable substances.
•
The spray guns are not to be cleaned with flammable solvents.
•
Caution against dangers that can arise from the sprayed substance and observe the
text and information on the containers or the specifications given by the substance
manufacturer.
•
Do not spray any liquid of unknown hazard potential.
•
The device may not be used in workplaces covered by the explosion-protection
regulations.
•
To avoid the hazard of explosion when spraying, provide for effective natural or
artificial ventilation.
•
There must be no sources of ignition such as, for example, open fires, smoke of lit
cigarettes, cigars and tobacco pipes, sparks, glowing wires, hot surfaces, etc. in the
vicinity during spraying.
•
When working with the HV2501EU indoors as well as outdoors ensure that no solvent
vapours are sucked in by the spray gun.
•
The spray gun is not a toy; children must therefore not be allowed to handle it or play
with it.
•
Before working on the spray gun remove the power plug from the socket-outlet.
•
Cover areas that are not to be sprayed. When working keep in mind that wind, for
example, may transport paint mist over great distances and cause damage.
•
Never open the device yourself in order to carry out repairs in the electrical system!
•
The units may only be used with a functional valve. If paints rises in the ventilating
hose (Fig. 1, 13) do not operate the unit further! Dismantle and clean the
ventilating hose, valve and diaphragm and replace the diaphragm if necessary.
•
Do not lay the spray gun down.
With original Earlex accessories and spare parts, you have the guarantee that all
safety regulations are fulfilled.

4. Description/ Scope of delivery

1) Air cap
3) Spray jet adjustment ring
5) Spray attachment
7) Spray gun rear part
9) Material volume adjustment
11) Container
Description/ Scope of delivery (Fig. 1)
2) Nozzle
4) Union nut
6) Trigger
8) Air filter cover (right + left)
10) Supply cord
12) Valve
EN
5