The Controls Of Your Wine Cooler; Setting The Temperature - Danby Silhouette DWC2727BLS Manual Del Usuario

The Controls of
your Wine Cooler
1
2
1. Run
Indicator light illuminates to signify the
cooling mode is currently in operation.
2. Electronic Display
Dispay screen shows current cabinet
temperature and set temperature (see
'Setting the Temperature' below).
Setting the
Temperature
When you plug in your
wine cooler for the first
time, the temperatures
will automatically be set
to 45°F (7°C) and 54°F
(12°C) in the left and right
compartments respectively
and will be displayed in
the Fahrenheit scale (°F).
Operating Instructions
3. °C / °F
4. 'UP' Button
• To switch the
between the Fahrenheit (°F)
and Celsius (°C)
depress the UP and DOWN
control buttons simultaneously for
approximately five (5) sec-
onds
• The temperature range for
both compartments can be set
as low as 39°F (4°C) or as
high as 64°F (18°C) to suit
your specific wine storage
requirements. Each depres-
sion of the UP or DOWN but-
ton will allow you adjust the
temperature in 1° degree
increments within the afore-
mentioned range.
6
3
Adjacent indicator light denotes which
scale of temperature is displayed.
Used to raise (warm) the temperature
in 1° degree increments.
'DOWN' Button
Used to lower (cool) the
temperature in 1° degree increments.
display • You may view your 'set' tem-
perature at any time by briefly
scale, depressing either the 'UP' or
'DOWN' button. The set tem-
perature will flash in the dis-
play area for 5 seconds before
the display resumes showing
the current cabinet tempera-
ture.
Please note: In the event of a
power failure or interruption,
all modified settings are lost
and the default settings are
used once power resumes.
4