Specifications; Table 12. Specifications - Hitachi CP-S225W Manual De Usuario

SPECIFICATIONS

SPECIFICATIONS

Table 12. Specifications

Item
Product name
Panel size
Liquid
Drive system
crystal
panel
Pixels
Lens
Lamp
Speaker
Power supply
Power consumption
Temperature range
Size
Weight (mass)
RGB IN
RGB
signal
input
AUDIO IN
VIDEO
S-VIDEO
Video
signal
input
COMPONENT
VIDEO
AUDIO
Control
CONTROL
functions
Optional Parts
•
NOTE This specifications are subject to change without notice.
ENGLISH-22
Liquid crystal projector
1.8 cm (0.7 type)
TFT active matrix
CP-S225W : 480,000 pixels (800 horizontal x 600 vertical)
CP-X275W : 786,432 pixels (1024 horizontal x 768 vertical)
Zoom lens F=2.0 ~ 2.3 f=18 ~ 21 mm
150 W UHB
1.0 W
AC100 ~ 120V, 2.7A / AC220 ~ 240V, 1.3A
240 W
0 ~ 35°C (Operating)
289 (W) x 84 (H) x 215 (D) mm
CP-S225W : 2.4 kg
CP-X275W : 2.5 kg
Video: Analog 0.7Vp-p, 75Ω terminator (positive)
H/V. sync.: TTL level (positive/negative)
Composite sync.: TTL level
D-sub 15-pin shrink jack
200mVrms, 47 kΩ (max. 3.0Vp-p)
Stereo mini jack
1.0Vp-p, 75Ω terminator
RCA jack
Brightness signal: 1.0Vp-p, 75Ω terminator
Color signal: 0.286Vp-p (NTSC, burst signal), 75Ω terminator
0.3Vp-p (PAL/SECAM, burst signal), 75Ω terminator
Mini DIN 4-pin jack
1.0 Vp-p, 75 Ω Terminator (Positive)
Y
0.7 Vp-p, 75 Ω Terminator (Positive)
C /C
B R
0.7 Vp-p, 75 Ω Terminator (Positive)
P /P
B R
L
200mVrms, 47 kΩ (max. 3.0Vp-p)
RCA jack
R
D-sub 15-pin shrink plug
Lamp: DT00401 (CP-S225W) / DT00461 (CP-X275W)
Air Filter: MU01461
* For others, consult your dealer.
Specification