Scope Of Delivery; General Information; Reading And Keeping The Instructions For Use; Explanation Of Symbols - Rothewald 10029729 Instrucciones De Uso

STEERING HEAD BEARING FITTING TOOL

1 | Scope of delivery

1
steering head bearing driver
1
1 - 3/8" adapter
2

2 | General information

2.1 | Reading and keeping the instructions for use

These instructions for use apply exclusively to the Rothewald Driver for the lower
steering head bearing on the motorcycle. They contain important information on
handling, safety and warranty. Read the instructions carefully, in particular the safety
instructions, before using the driver. Failure to adhere to instructions can cause
damage to the vehicle and result in consequential damages or even an accident. Keep
these instructions for future reference. If you pass the Rothewald Driver on to third
parties, you must also hand over these instructions.
The instructions for use are based on the standards and regulations valid in the
European Union. If abroad, observe country-specific guidelines and laws.

2.2 | Explanation of symbols

The following symbols and signal words are used in these instructions.
This signal symbol/word indicates a hazard with a
medium risk level which, if not avoided, may result in
WARNING!
death or serious injury.
10
2
3
4
1" adapter
3
1 - 1/8" adapter
4
This signal word warns of possible material damage.
NOTE!
This symbol gives you useful additional information about
assembly or usage.

3 | Safety

3.1 | Intended use

The Rothewald Driver for the lower steering head bearing is used to ensure that the
steering head bearing ring is securely driven onto the steering column of the lower triple
tree. It is suitable for steering head tubes with a diameter of 31.4 mm and less at their
thickest point (bottom) and for steering head bearings with an inner bearing ring of 32
- 45 mm diameter.
Since this is a universal product and not intended just for one particular vehicle, it is
important to make sure that it can be used safely and correctly on your vehicle before
you use the product for the first time.
Always follow the instructions in your vehicle owner's manual and the directions of
the vehicle manufacturer. This is essential, as improper use of this product or its
unsuitability for a vehicle could impair the safety of the vehicle and/or damage it.
Only use the Rothewald Steering Head Bearing Driver as described in these
instructions. Any other use is considered improper use and may result in material
damage. The manufacturer or supplier accepts no liability for damage caused by
improper or incorrect use.

3.2 | Safety instructions

WARNING!
Risk of accident!
• Before using the tool, please read these instructions carefully.
• Please bear in mind that an incorrectly fitted steering head
bearing, one that only settles while driving, may lead to an
unsteady chassis and cause a serious accident! The same
applies to a steering head bearing that has not been correctly
adjusted.
WARNING!
Danger for children and persons with reduced physical, sensory or
mental abilities (e.g. partially disabled persons, elderly persons
11