Dishwasher
Features & Options
Wash Cycles
_The cycles listed below vary by models.
Power Scrub/Auto
Plus
Cleans items having baked-on
or hard dried food soils.
These items
may require soaking
or hand
scouring.
Designed to be used with heavily soiled dishes as well as
pots and pans.
Auto Wash
Takes the guesswork out of cycle selection. The sensors
in the dishwasher
automatically
adjust the cycle length,
temperature
and water changes based on the soil load.
This cycle
contains
additional
sensor decisions
when
compared to other cycles.
Auto Delicate/Delicate
Wash
Designed to be used with your fragile china and glassware,
allowing you to get it perfectly clean without
the hassle of
hand washing or worry of damage in the dishwasher.
Regular Wash
Thoroughly
cleans normal loads having loosely attached
normal soiling.
Quick Wash
Cleans lightly soiled dishes and reduces overall wash time.
Use this cycle to clean glasses and dessert dishes that may
need to be re-used at the same event.
Rinse & Hold
Allows you to rinse the food soil off of a partial load and
hold them in the dishwasher until there is a full load.
Eco Wash
This cycle is optimized
to be even more energy efficient.
Eg. On lightly soiled loads it uses much less water and
energy than traditional
cycles.
Wash Cycle Options
_The options listed below vary by models.
Options can be used along with wash cycle to customize
load for personalized
results:
1. Select wash cycle
2. Select option
3. Start dishwasher
Half Load
In the Power Scrub, Regular, and Auto Wash cycles you
can reduce the energy
and water consumption
when
washing small, lightly soiled loads that fill approximately
half the dishwasher's capacity.
To activate, select the Half Load button in addition
to any
of the three cycles listed above.
Top Rack Only
This option
allows you to save energy
and water
by
washing loads small enough to fill the top rack only.
EcoAction
TM
This option saves energy by reducing the water
temperature.
Sanitize Option
All models are designed
to sanitize the loaded dishes.
Press the Sanitize Option button to activate the Sanitation
features. The technical
sanitation
measures
may also
improve the drying results.
Delay Start
This option
allows you to delay the start time of your
dishwasher. To activate:
•
Turn the dishwasher on.
•
Select the desired wash cycle.
•
Press and
hold
the
Delay
Start button.
Release
when the desired delay time is shown in the display
window.
17